NSN 5306-01-525-8873
Coaxial Connector
3.198 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6303-46 for national stock number 5306015258873.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-525-8873.
-
MPN or Model
NAS6303-46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
3.198 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
End Application
Rq-4a -
Thread Diameter
0.375 inches -
Grip Length
2.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
95000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance, a286 cres, short thread, reduced major thread dia., nonlocking, 160ksi ftu -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-461, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-455-2466 MPN NAS1063A20-500BATerminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-061-0266 MPN MS51029-50Setscrew
- 5305-00-068-0544 MPN MS24678-15CSocket Head Cap Screw
- 5305-00-070-3275 MPN NAS1153C12Close Tolerance Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-118-3005 MPN AN565BC6H5Setscrew
- 5305-00-149-9927 MPN NAS335-7Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-525-8873 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303-46 | National Aerospace Standards |