NSN 5306-01-525-8875
Coaxial Connector
W/shot peening.
Manufacturer part number NAS6705G11 for national stock number 5306015258875.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-525-8875.
-
MPN or Model
NAS6705G11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
1.157 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
End Application
Rq-4a -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Part Name Assigned By Controlling Agency
Bolt, hex head, close tolerance, a286 cres, long threads, nonlocking -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1333 MPN NAS1375A04SB04Aircr Air Duct Hose
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-003-9287 MPN MS27039C0828Machine Screw
- 5305-00-008-5889 MPN NAS1102E08-9Machine Screw
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-052-9802 MPN MS24694C50Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-525-8875 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705G11 | National Aerospace Standards |