NSN 5306-01-526-3899
Close Tolerance Hex Head Bolt
Between 1.500 inches and 1.547 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: 0.374 inches .
Manufacturer part number ST3M747-6H16 for national stock number 5306015263899.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-526-3899.
-
MPN or Model
ST3M747-6H16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
Between 1.500 inches and 1.547 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
0.374 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Head Minor Diameter
0.582 inches -
End Application
Fighter aircraft - first (f18 e/f) -
Grip Length
Between 0.990 inches and 1.010 inches -
Criticality Code Justification
Agav -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.396 inches first hole -
Material
Steel comp xm-13 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2833 MPN LS15267V3-34Machine Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5305-01-600-9639 MPN PMT601-20PClose Tolerance Screw
- 5306-00-121-6669 MPN BACB30FD5H4Shear Bolt
- 5306-00-137-6580 MPN VAL23602-4D016Close Tolerance Bolt
- 5306-00-458-1871 MPN BACB30EK5-11CShear Bolt
- 5306-00-929-8941 MPN VCC0090-5-12Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-526-3899 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M747-6H16 | Boeing Company, The |
VCG0002-6H16 | Valley-todeco, Inc. |
S397-6H16 | Huck International, Inc. |
122896-6H16 | Sps Technologies, Llc |
AIC688-6H16 | Sps Technologies, Llc |
PBF1266-6H16 | Sps Technologies, Llc |
HP7747-6H16 | Heartland Precision Fasteners, Inc. |
ST3M747-6H16 | Fastener Innovation Technology, Inc. |
VS3191-6H16 | Arconic Global Fasteners & Rings, |
SLB254-6H16 | Space-lok, Inc. |
GS1031-6H16 | B & B Specialties Inc. |
ST3M747-6H16 | Houston Precision Fasteners I, Lp |
MB155-6H16 | Hi-shear Corporation |
122896-6H16 | Sps Technologies, Llc |
122896-6H16 | Sps Technologies Inc |
ST3M747-6H16 | M.s. Aerospace Inc. |