NSN 5306-01-526-8988
Wheel Bolt
Between 3.204 inches and 3.250 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number MS21095-4044 for national stock number 5306015268988.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-526-8988.
-
MPN or Model
MS21095-4044
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.510 inches -
Fastener Length
Between 3.204 inches and 3.250 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Locking Feature
Patch locking feature or pellet locking feature or strip locking feature -
Thread Diameter
0.250 inches -
Grip Length
Between 2.740 inches and 2.760 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c fastener and 32.0 rockwell c fastener -
Material
Steel comp 431 fastener -
Material Specification
Mil-s-18732 military specification single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-005-2828 MPN MS24265R22B55SNLEVELXElectrical Receptacle Connector
- 5940-00-045-9078 MPN MS25189-103Lug Terminal
- 5940-00-050-6289 MPN MS35447-5Lug Terminal
- 5935-00-055-8152 MPN MS17348R20N24SElectrical Receptacle Connector
- 5935-00-147-9551 MPN MS27508E12F98SElectrical Receptacle Connector
- 5935-00-170-8480 MPN MS3449H12C3PElectrical Receptacle Connector
- 5935-00-201-4615 MPN MS3106E24-7PElectrical Plug Connector
- 5905-00-246-9399 MPN RCR32G202JRComposition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-526-8988 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-4044 | Military Standards |
Stock Check
- NE: 38
- NS: 3