NSN 5306-01-526-9004
Wheel Bolt
Between 1.016 inches and 1.062 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number MS21095-5008 for national stock number 5306015269004.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-526-9004.
-
MPN or Model
MS21095-5008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.572 inches -
Fastener Length
Between 1.016 inches and 1.062 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Locking Feature
Patch locking feature or pellet locking feature or strip locking feature -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
26.0 rockwell c fastener and 32.0 rockwell c fastener -
Material
Steel comp 431 fastener -
Material Specification
Mil-s-18732 military specification single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-143-4793 MPN MS25036-10Lug Terminal
- 5935-00-149-3425 MPN MS3102A22-2PElectrical Receptacle Connector
- 5935-00-173-5693 MPN MS27473T16A26SElectrical Plug Connector
- 5905-00-190-8872 MPN MS35045-29Composition Fixed Resistor
- 5905-00-195-6821 MPN MS35045-203Composition Fixed Resistor
- 5935-00-199-2652 MPN MS3106A20-22PElectrical Plug Connector
- 5975-00-244-6118 MPN MS39030-3Crossarm Brace
- 5935-00-328-3502 MPN MS3106F28-20PXElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-526-9004 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-5008 | Military Standards |