NSN 5306-01-527-2332
Coaxial Connector
Between 1.048 inches and 1.078 inches fastener length, between 0.300 inches and 0.320 inches head height, between 0.492 inches and 0.502 inches width between flats, grip length: 0.625 inches .
Manufacturer part number NAS6305-10D for national stock number 5306015272332.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-527-2332.
-
MPN or Model
NAS6305-10D
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Height
Between 0.300 inches and 0.320 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
End Application
Feedback system, fan thrust reverser, b757 aircraft -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
8025nas6305-10d government specification
More from these suppliers
- 5940-00-498-0032 MPN NAS1745-25Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-007-0288 MPN NAS1191E08T7Socket Head Cap Screw
- 5305-00-050-4219 MPN MS21295-27Socket Head Cap Screw
- 5305-00-052-5923 MPN MS35198-69Machine Screw
- 5305-00-058-9371 MPN MS51977-33Setscrew
- 5305-00-058-9375 MPN MS51977-42Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-527-2332 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6305-10D | National Aerospace Standards |