NSN 5306-01-527-5685
Coaxial Connector
3.152 inches fastener length, dished hexagon head style, 0.500 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number NAS116-40D for national stock number 5306015275685.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-527-5685.
-
MPN or Model
NAS116-40D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.770 inches -
Fastener Length
3.152 inches -
Head Style
Dished hexagon -
Head Height
0.500 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.998 inches and 0.999 inches -
Shank Unthreaded Hole Diameter
0.141 inches threads -
Thread Diameter
1.000 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
12 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-340-0045 MPN NAS164Control Whee Insert
- 5940-00-949-3167 MPN NAS1745-19Conductor Splice
- 5940-01-058-8888 MPN NAS1744-5Conductor Splice
- 5305-00-005-5975 MPN NAS1506-13TClose Tolerance Screw
- 5305-00-007-1550 MPN NAS1131C96PClose Tolerance Screw
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-038-2431 MPN NAS514P632-22Machine Screw
- 5305-00-043-0267 MPN MS24693-C274Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-527-5685 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS116-40D | National Aerospace Standards |