NSN 5306-01-530-2445
Coaxial Connector
Lubricant, solid film per as5272 type 1.
Manufacturer part number MS14181-06026L for national stock number 5306015302445.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-530-2445.
-
MPN or Model
MS14181-06026L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.659 inches -
Fastener Length
Between 2.294 inches and 2.324 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
20900 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response or ams 5663 assn standard single material response or ams 5962 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-001-7260 MPN MS24614K282Toggle Switch
- 5935-00-020-7897 MPN MS3102K20-2SCElectrical Receptacle Connector
- 5935-00-020-7905 MPN MS3112E14-15SWElectrical Receptacle Connector
- 5930-00-021-6415 MPN MS27409-2KToggle Switch
- 5950-00-031-4558 MPN MS75084-13Radio Frequency Coil
- 5940-00-082-4891 MPN MS17156-6Feedthru Terminal
- 5930-00-099-0357 MPN MS24658-24MToggle Switch
- 5935-00-177-2001 MPN MS25183A12S3SXCElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-530-2445 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-06026L | Military Standards |
20-106-06026L | Bell Helicopter Textron Inc. |
Stock Check
- NE: 742
- NS: 1