NSN 5306-01-531-0803
Coaxial Connector
Between 2.720 inches and 2.750 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708D24 for national stock number 5306015310803.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-531-0803.
-
MPN or Model
NAS6708D24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 2.720 inches and 2.750 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5935-01-613-6861 MPN 500910-00Electrical Connector End Seal Plug
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-051-7325 MPN NAS1352-3H32Socket Head Cap Screw
- 5305-00-058-1538 MPN NAS662C0LL2Socket Head Cap Screw
- 5305-00-063-3507 MPN MS24693-S274Machine Screw
- 5305-00-137-6550 MPN NAS1634-5Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-531-0803 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708D24 | National Aerospace Standards |