NSN 5306-01-531-3137
Coaxial Connector
Between 2.763 inches and 2.793 inches fastener length, dished hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6709DU31 for national stock number 5306015313137.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-531-3137.
-
MPN or Model
NAS6709DU31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
Between 2.763 inches and 2.793 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.157 inches first hole -
Single Shear Strength
95000 pounds per square inch -
End Application
Sh-2g helicopter -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.560 inches first hole -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-923-4493 MPN NAS1745-4Conductor Splice
- 5940-01-498-1857 MPN NAS1063D-1-3Terminal Board Marker Strip
- 5305-00-008-9117 MPN NAS1190C04T4LSocket Head Cap Screw
- 5305-00-059-2488 MPN MS51976-44Setscrew
- 5305-00-086-2454 MPN NAS1202-7Close Tolerance Screw
- 5305-00-086-2455 MPN NAS1202-8Close Tolerance Screw
- 5305-00-143-3164 MPN NAS1352-12LE44PSocket Head Cap Screw
- 5305-00-145-0952 MPN NAS1206-7Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-531-3137 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6709DU31 | National Aerospace Standards |