NSN 5306-01-531-3864
Coaxial Connector
5.278 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6308-76D for national stock number 5306015313864.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-531-3864.
-
MPN or Model
NAS6308-76D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
5.278 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
End Application
C-17a aircraft -
Thread Diameter
0.500 inches -
Grip Length
4.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.580 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance, a 286 cres, short thread, reduced mmajor thread dia, nonlocking, 160 ksi ftu -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-010-1571 MPN NAS1745-11Conductor Splice
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-007-2952 MPN NAS1100E02-2Machine Screw
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
- 5305-00-052-6911 MPN MS24629-15Tapping Screw
- 5305-00-059-4550 MPN MS35190-235Machine Screw
- 5305-00-068-0541 MPN MS24677-30Socket Head Cap Screw
- 5305-00-127-3550 MPN NAS1191-06T8LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-531-3864 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308-76D | National Aerospace Standards |
Stock Check
- NE: 178
- NS: 1