NSN 5306-01-531-6997
Close Tolerance Hex Head Bolt
Pan no. 2 head style, 1.125 inches head diameter, 0.180 inches head height, grip diameter: between 0.748 inches and 0.749 inches .
Manufacturer part number 75A230641-2009 for national stock number 5306015316997.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-531-6997.
-
MPN or Model
75A230641-2009
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.480 inches -
Head Style
Pan no. 2 -
Head Diameter
1.125 inches -
Head Height
0.180 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Thread Diameter
1.750 inches -
Grip Length
Between 1.120 inches and 1.130 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel comp xm-13 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-001-1496 MPN BACS13SGrounding Metallic Shielded Cable Ferrule
- 1560-00-050-0004 MPN 32-31004-211Aircraft Skin
- 1560-00-075-4214 MPN 32-32316-301Door Bracket Assembly
- 1560-00-082-8938 MPN 32-58287-3Fueling Val Adapter
- 5935-00-257-9717 MPN 5M227-8SReceptacle Dummy Connector
- 1560-00-261-6057 MPN 68A325510-2002Aircraft Skin
- 1560-00-264-1242 MPN 68A870709-2001Avioni Air Cooling Duct Assembly
- 1680-00-406-5881 MPN 53G79601-85Wire Bundle Assembl
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-531-6997 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
75A230641-2009 | The Boeing Company |
75A230641-2009 | Boeing Company, The |