NSN 5306-01-532-1311
Close Tolerance Hex Head Bolt
Self-retaining; impedance type.
Manufacturer part number MS27576-6-17 for national stock number 5306015321311.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-532-1311.
-
MPN or Model
MS27576-6-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.533 inches and 0.549 inches -
Fastener Length
Between 1.601 inches and 1.621 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3743 inches -
Point Diameter
0.327 inches -
Point Style
Flat -
Thread Diameter
0.375 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel fastener -
Material Specification
Ams 5643, 17-4ph assn standard single material response locking feature or ams 5644, 17-7ph assn standard single material response locking feature or ams 5678, 17-7ph assn standard single material response locking feature or qq-s-763 federal specification single material response locking feature -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 1680-01-544-9075 MPN NAS1375A16SA283Mater Aircraft Hose
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
- 5305-00-150-0846 MPN NAS1189C02T14LSocket Head Cap Screw
- 5305-00-150-0847 MPN NAS1189E06T24LSocket Head Cap Screw
- 5305-00-150-3411 MPN NAS1191-08P10NSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-532-1311 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-6-17 | National Aerospace Standards |
MS27576-6-17 | Military Standards |