NSN 5306-01-532-9075
Coaxial Connector
0.448 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.376 inches .
Manufacturer part number NAS6203-2Y for national stock number 5306015329075.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-532-9075.
-
MPN or Model
NAS6203-2Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.448 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.376 inches -
Grip Diameter
0.189 inches -
End Application
F-16 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4340 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6203 professional/industrial association standard
More from these suppliers
- 5940-01-413-3014 MPN NAS1063B227-230Terminal Board Marker Strip
- 5940-01-452-6925 MPN NAS1063A11-172GTerminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-007-6172 MPN NAS1100E00-4Machine Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-057-7182 MPN NAS1351-3-14Socket Head Cap Screw
- 5305-00-071-2097 MPN MS51958-85Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-532-9075 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203-2Y | National Aerospace Standards |