NSN 5306-01-533-8904
Close Tolerance Hex Head Bolt
Shear strength.
Manufacturer part number 68485-9-21 for national stock number 5306015338904.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-533-8904.
-
MPN or Model
68485-9-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
Ba -
Thread Direction
Right-hand -
Thread Length
0.642 inches -
Fastener Length
2.000 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.632 inches and 0.652 inches -
End Application
Tristar aircraft -
Thread Diameter
0.875 inches -
Grip Length
Between 0.588 inches and 0.608 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel comp h11 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-145-2113 MPN SFT930-4-24Close Tolerance Screw
- 5305-00-754-2071 MPN NAS1203-9WClose Tolerance Screw
- 5305-01-044-6551 MPN NAS1189E3T18LSocket Head Cap Screw
- 5305-01-059-1924 MPN NAS1190-02P3KSocket Head Cap Screw
- 5305-01-059-1928 MPN 330-1702-040Socket Head Cap Screw
- 5305-01-116-7354 MPN NAS1190-06P10HSocket Head Cap Screw
- 5305-01-123-7098 MPN 965812-410CMachine Screw
- 5305-01-143-6536 MPN ST3M653C5-14AShoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-533-8904 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68485-9-21 | Sps Technologies, Llc |