NSN 5306-01-534-4051
Coaxial Connector
Hexagon head style, 0.375 inches head height, 1.052 inches width between flats, grip diameter: 1.023 inches .
Manufacturer part number NAS6712U78D for national stock number 5306015344051.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-534-4051.
-
MPN or Model
NAS6712U78D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
1.052 inches -
Grip Diameter
1.023 inches -
End Application
NSN:-14-270-1532 -
Grip Length
0.780 inches -
Part Name Assigned By Controlling Agency
Standard part -
Material
Steel -
Supplementary Features
Drilled shank -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9126 MPN NAS25-4LTrunnion Tank Strap
- 1680-01-647-3586 MPN AMP277153-1Cable Lug
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-047-3146 MPN NAS1352-06-16PSocket Head Cap Screw
- 5305-00-059-8382 MPN MS35215-52Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-086-6993 MPN MS27039-5-14Machine Screw
- 5305-00-102-3013 MPN NAS1623-9DMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-534-4051 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712U78D | National Aerospace Standards |
NAS6712U78D | National Aerospace Standards |
NAS6712U78D | National Aerospace Standards |
NAS6712U78D | National Aerospace Standards |
Stock Check
- NE: 164
- NS: 1