NSN 5306-01-535-6259
Coaxial Connector
Between 1.643 inches and 1.673 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21134-04019 for national stock number 5306015356259.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-535-6259.
-
MPN or Model
MS21134-04019
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.465 inches -
Fastener Length
Between 1.643 inches and 1.673 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
69800 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-443-8866 MPN NAS1063Terminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-007-0283 MPN NAS1100E08-26Machine Screw
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-053-1076 MPN MS35199-31Machine Screw
- 5305-00-054-9282 MPN MS51955-57Setscrew
- 5305-00-114-1915 MPN NAS1352-16LE64PSocket Head Cap Screw
- 5305-00-207-1788 MPN NAS517-3-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-535-6259 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-04019 | National Aerospace Standards |
MS21134-04019 | National Aerospace Standards |
MS21134-04019 | National Aerospace Standards |