NSN 5306-01-536-2155
Coaxial Connector
1.011 inches fastener length, hexagon head style, between 0.090 inches and 0.105 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203-11H for national stock number 5306015362155.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-536-2155.
-
MPN or Model
NAS6203-11H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
1.011 inches -
Head Style
Hexagon -
Head Height
Between 0.090 inches and 0.105 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.180 inches and 0.200 inches -
Grip Diameter
Between 0.1845 inches and 0.1850 inches -
Thread Diameter
0.190 inches -
Grip Length
0.688 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6349 assn standard single material response or ams6484 assn standard single material response or ams6332 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-135-7077 MPN NAS1745-3Conductor Splice
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5940-01-446-4551 MPN NAS1063A3Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-007-1590 MPN NAS1102E04-5PMachine Screw
- 5305-00-008-7870 MPN NAS1191E06P5LSocket Head Cap Screw
- 5305-00-051-2327 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-536-2155 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203-11H | National Aerospace Standards |