NSN 5306-01-537-4929
Coaxial Connector
1.374 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number C078-8-8 for national stock number 5306015374929.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-537-4929.
-
MPN or Model
C078-8-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.561 inches -
Fastener Length
1.374 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unj
More from these suppliers
- 5305-00-508-3071 MPN LS15265V5-11Close Tolerance Screw
- 5305-00-915-4765 MPN AIC792-3-9Machine Screw
- 5305-01-016-4343 MPN AIC812-3-6Machine Screw
- 5305-01-084-5393 MPN NAS1101-4-11BMachine Screw
- 5305-01-088-6062 MPN NAS1101E08-10PMachine Screw
- 5305-01-158-5371 MPN AIC940-3-9Machine Screw
- 5305-01-435-5847 MPN BACB30LU8-37Close Tolerance Screw
- 5305-01-454-0414 MPN LD111-0045-2416Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-537-4929 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C078-8-8 | Lockheed Martin Corporation |
AIC930-8-8 | Sps Technologies, Llc |
EWSB930-8-8 | Sps Technologies, Llc |