NSN 5306-01-538-3380
Coaxial Connector
0.782 inches fastener length, double hexagon extended washer head style, 0.388 inches head height, width between flats: 0.502 inches .
Manufacturer part number EWB0420D-6H-2 for national stock number 5306015383380.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-538-3380.
-
MPN or Model
EWB0420D-6H-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.657 inches -
Fastener Length
0.782 inches -
Head Style
Double hexagon extended washer -
Head Height
0.388 inches -
Width Between Flats
0.502 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
0.435 inches -
Thread Diameter
0.375 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Minimum Yield Strength
200000 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3456 MPN HT4024L5-9-1Close Tolerance Screw
- 5305-00-460-4669 MPN 64228V4-2Close Tolerance Screw
- 5305-00-581-6484 MPN NAS1189C4P6LSocket Head Cap Screw
- 5305-00-815-0684 MPN NAS1123-7HClose Tolerance Screw
- 5305-00-821-7031 MPN NAS1102-02-20Machine Screw
- 5305-01-007-1537 MPN 106706H4-5Close Tolerance Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-043-1858 MPN NAS1221-06V6Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-538-3380 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB0420D-6H-2 | Sps Technologies, Llc |