NSN 5306-01-538-6467
Coaxial Connector
Between 0.591 inches and 0.638 inches fastener length, 0.437 inches thread diameter, +0.4358/+0.4367 inches nonstandard thread pitch diameter, thready qty per inch (tpi): 20.
Manufacturer part number EWSB22-7-21 for national stock number 5306015386467.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-538-6467.
-
MPN or Model
EWSB22-7-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Fastener Length
Between 0.591 inches and 0.638 inches -
End Application
Helicopter -
Thread Diameter
0.437 inches -
Nonstandard Thread Pitch Diameter
+0.4358/+0.4367 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-2835 MPN 411135-203Setscrew
- 5305-00-510-5229 MPN LS15234C4-7Close Tolerance Screw
- 5305-00-623-6356 MPN HT4036-4-7Close Tolerance Screw
- 5305-00-828-4612 MPN NAS1152E4Close Tolerance Screw
- 5305-00-915-2129 MPN NAS1124-20Close Tolerance Screw
- 5305-01-005-0465 MPN 38030-3F10CSocket Head Cap Screw
- 5305-01-009-6705 MPN SFT22-4A9Close Tolerance Screw
- 5305-01-023-9050 MPN NAS1191-02T3BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-538-6467 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-7-21 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)
- NE: 59
- NS: 2