NSN 5306-01-539-3551
Coaxial Connector
Between 1.652 inches and 1.699 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number AIC793-4-22 for national stock number 5306015393551.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-539-3551.
-
MPN or Model
AIC793-4-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
Between 1.652 inches and 1.699 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.084 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.168 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-054-4631 MPN BACB30LU2-1Close Tolerance Screw
- 5305-01-149-1940 MPN BACB30MA6-5Shoulder Screw
- 5305-01-235-3591 MPN 9132M23P43Machine Screw
- 5305-01-236-6191 MPN AIC9535-6-26Close Tolerance Screw
- 5305-01-255-9449 MPN HT4025L3D6Close Tolerance Screw
- 5305-01-290-7453 MPN C9535-8-15Close Tolerance Screw
- 5305-01-338-1319 MPN BACS12GU3K31Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-539-3551 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC793-4-22 | Sps Technologies, Llc |
70302-4-22 | Sps Technologies, Llc |
C082-4-22D | Lockheed Martin Corporation |