NSN 5306-01-540-2910
Coaxial Connector
1.610 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708-14 for national stock number 5306015402910.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-540-2910.
-
MPN or Model
NAS6708-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
1.610 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
End Application
C-17a spt eqmt -
Thread Diameter
0.500 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-460-1733 MPN NAS1745-14Conductor Splice
- 5930-00-850-3806 MPN NAS543-5Toggle Switch
- 5940-01-361-7078 MPN NAS1063D-1-7Terminal Board
- 5935-01-479-7268 MPN NAS1712D6-11NElectrical Connector Cable Clamp
- 5305-00-079-2589 MPN NAS1154-11Close Tolerance Screw
- 5305-00-079-5834 MPN NAS514-832-14Machine Screw
- 5305-00-136-2800 MPN NAS1190-02P4Machine Screw
- 5305-00-143-3300 MPN NAS1190-04P3LKSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-540-2910 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708-14 | National Aerospace Standards |