NSN 5306-01-541-9396
Coaxial Connector
Between 2.204 inches and 2.234 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6705U28 for national stock number 5306015419396.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-541-9396.
-
MPN or Model
NAS6705U28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.219 inches -
Fastener Length
Between 2.204 inches and 2.234 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
175000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-718-1721 MPN NAS707C3Stud Terminal
- 5940-01-425-6507 MPN NAS1063A5-441Terminal Board Marker Strip
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 5305-00-059-5432 MPN MS51958-82Machine Screw
- 5305-00-145-0834 MPN NAS1635-04LN7Socket Head Cap Screw
- 5305-00-225-9082 MPN MS90726-27Hexagon Head Cap Screw
- 5305-00-272-6373 MPN MS24677-73Socket Head Cap Screw
- 5305-00-274-0412 MPN NAS608C832-16Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-541-9396 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705U28 | National Aerospace Standards |
Stock Check
- NS: 80
- NE: 2249