NSN 5306-01-541-9648
Coaxial Connector
0.425 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1954C8P for national stock number 5306015419648.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-541-9648.
-
MPN or Model
NAS1954C8P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.425 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.263 inches and 0.264 inches -
Thread Diameter
0.250 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
28.0 -
Min. Tensile Strength (psi)
6980 pounds per square inch -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6042 MPN NAS1063A5-437Terminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-008-5890 MPN NAS1102E08-14Machine Screw
- 5305-00-022-3095 MPN NAS1352-7LE16PSocket Head Cap Screw
- 5305-00-054-9241 MPN MS24694C100Machine Screw
- 5305-00-068-5405 MPN MS16996-14Socket Head Cap Screw
- 5305-00-074-4518 MPN NAS1156-21Machine Screw
- 5305-00-085-4056 MPN MS3212-39Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-541-9648 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1954C8P | National Aerospace Standards |