NSN 5306-01-542-3094
Coaxial Connector
3.466 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number MS21297H07043 for national stock number 5306015423094.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-542-3094.
-
MPN or Model
MS21297H07043
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.763 inches -
Fastener Length
3.466 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Head Minor Diameter
Between 0.485 inches and 0.500 inches -
Thread Diameter
0.437 inches -
Grip Length
2.688 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hole Configuration Style
Spline -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 ty2 cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-057-0533 MPN MS51958-49Machine Screw
- 5305-00-071-2094 MPN MS51958-84Machine Screw
- 5305-00-104-5073 MPN NAS1352-4LE40PSocket Head Cap Screw
- 5305-00-159-5556 MPN NAS1102E03-8Machine Screw
- 5305-00-225-7116 MPN NAS1172-2NClose Tolerance Screw
- 5305-00-269-2813 MPN MS90726-69Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-542-3094 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H07043 | National Aerospace Standards |