NSN 5306-01-542-5080
Coaxial Connector
Between 0.565 inches and 0.595 inches fastener length, spline extended washer head style, between 0.195 inches and 0.215 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number MS21134-03003 for national stock number 5306015425080.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-542-5080.
-
MPN or Model
MS21134-03003
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.378 inches -
Fastener Length
Between 0.565 inches and 0.595 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Head Minor Diameter
Between 0.173 inches and 0.188 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 or steel comp 8740 or steel comp 6150 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-007-3797 MPN MS3456L28-21SElectrical Plug Connector
- 5935-00-121-4992 MPN MS3456KT20-7SElectrical Plug Connector
- 5935-00-173-4095 MPN MS17344R32C7PXElectrical Plug Connector
- 5935-00-177-2092 MPN MS24266G16T24PNElectrical Plug Connector
- 5935-00-201-0610 MPN MS27474E14B18SElectrical Receptacle Connector
- 5935-00-258-6590 MPN MS27473T22B35SElectrical Plug Connector
- 5935-00-259-7447 MPN MS3108B18-10SElectrical Plug Connector
- 5950-00-309-7904 MPN MS75084-5Radio Frequency Coil
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-542-5080 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-03003 | Military Standards |