NSN 5306-01-543-2020
Coaxial Connector
0.768 inches fastener length, spline extended washer head style, 0.205 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number MS21134-03006 for national stock number 5306015432020.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-543-2020.
-
MPN or Model
MS21134-03006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.378 inches -
Fastener Length
0.768 inches -
Head Style
Spline extended washer -
Head Height
0.205 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Head Minor Diameter
Between 0.173 inches and 0.188 inches -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3910 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response or mil-s-8503 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-727-3107 MPN NAS704C2Stud Terminal
- 5940-01-425-7399 MPN NAS1063C8-303Terminal Board Marker Strip
- 1680-01-547-3388 MPN NAS77A12-018NPre Flanged Bushing
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-057-0536 MPN NASM51958Machine Screw
- 5305-00-058-4010 MPN MS24694S118Machine Screw
- 5305-00-104-5072 MPN NAS1352-02LE8PSocket Head Cap Screw
- 5305-00-143-3229 MPN MS21295-71Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-543-2020 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-03006 | National Aerospace Standards |
MS21134-03006 | Military Standards |