NSN 5306-01-544-8801
Coaxial Connector
Dry film lubricant per mil-l-46010, type 1.
Manufacturer part number MS14181-06006L for national stock number 5306015448801.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-544-8801.
-
MPN or Model
MS14181-06006L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.659 inches -
Fastener Length
1.059 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
End Application
Spec item -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-011-3767 MPN MS3102R22-4PElectrical Receptacle Connector
- 4820-00-059-4920 MPN MS28771-12Check Valve
- 1680-00-066-4550 MPN MS18037-1Linear Electro-mechanical Actuator
- 5905-00-108-4822 MPN MS35046-21Nonprecision Wire Wound Variable Resistor
- 5935-00-163-7115 MPN MS3456L14S7SXElectrical Plug Connector
- 5935-00-177-2086 MPN MS24264G18T31PNXElectrical Receptacle Connector
- 5905-00-195-6741 MPN MS35043-206Composition Fixed Resistor
- 5935-00-229-2648 MPN MS3106A28-11PElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-544-8801 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-06006L | Military Standards |
Stock Check
- NE: 91