NSN 5306-01-545-2476
Coaxial Connector
Between 0.933 inches and 0.983 inches fastener length, double hexagon w/hole head style, 0.275 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 20-097-03-5 for national stock number 5306015452476.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-545-2476.
-
MPN or Model
20-097-03-5
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.334 inches -
Fastener Length
Between 0.933 inches and 0.983 inches -
Head Style
Double hexagon w/hole -
Head Height
0.275 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.345 inches -
Extended Washer Thickness
0.064 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
End Application
Ah-1w; bolt, tension, nickel alloy 718, 220 ksi, external wrenching, 12 point, flanged head -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220 megapascals -
Part Name Assigned By Controlling Agency
Inavy-bolt -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-072-1071 MPN 205-030-009-27Seal
- 5985-00-097-9747 MPN 206-075-543-003Antenna
- 1560-00-121-6707 MPN 205-030-163-29Beam Assembly Stiffener
- 1560-00-126-9187 MPN 206-032-208-001Engine Moun Support
- 1560-00-133-7224 MPN 205-030-403-27Fuselage Section
- 5905-00-147-0388 MPN 110-054H301JComposition Fixed Resistor
- 1560-00-151-4150 MPN 205-061-621-006Aircraft Fuel Tank
- 1560-00-176-1979 MPN 205-062-685-002Fuel Outlet Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-545-2476 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-097-03-5 | Bell Helicopter Textron Inc. |