NSN 5306-01-546-1703
Coaxial Connector
0.766 inches fastener length, spline extended washer head style, 0.205 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number MS21296-03005 for national stock number 5306015461703.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-546-1703.
-
MPN or Model
MS21296-03005
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
0.766 inches -
Head Style
Spline extended washer -
Head Height
0.205 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Head Minor Diameter
Between 0.173 inches and 0.188 inches -
Thread Diameter
0.190 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, tyii, cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 1560-01-623-1804 MPN 520-14948-2Aircraft Stringer
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-035-5383 MPN NAS1581A3H13TClose Tolerance Screw
- 5305-00-052-5084 MPN NAS338CPA17Close Tolerance Screw
- 5305-00-054-6668 MPN NAS1635-08-6PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-546-1703 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-03005 | National Aerospace Standards |