NSN 5306-01-546-3806
Coaxial Connector
Hexagon extended washer head style, between 0.715 inches and 0.725 inches head height, between 0.485 inches and 0.500 inches width between flats, hole diameter: between 0.373 inches and 0.374 inches .
Manufacturer part number C305-6-14 for national stock number 5306015463806.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-546-3806.
-
MPN or Model
C305-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Head Style
Hexagon extended washer -
Head Height
Between 0.715 inches and 0.725 inches -
Width Between Flats
Between 0.485 inches and 0.500 inches -
Hole Diameter
Between 0.373 inches and 0.374 inches -
Single Shear Strength
156000 pounds per square inch -
Thread Diameter
0.375 inches -
Hole Quantity
1 -
Hole Type
Threaded -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hole Configuration Style
Round -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium or nickel -
Surface Treatment Specification
Mil-c-8837 type ii class 3 or typw ii class 2 military standard all treatment responses and ams2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-264-1081 MPN 12M642-10Aircraft Frame
- 1560-00-352-7075 MPN 12B096-834Aircraft Leading Edge
- 4920-00-413-6515 MPN 12A2649-277Aircraft Maintenance Fixture
- 1560-00-442-1561 MPN 12B11514-72Door Seal Retainer
- 1560-00-499-6118 MPN 12W8410-805Wing Landing Flap
- 1560-00-920-2321 MPN 12M4813-1Aircraft Structural Component Support
- 1680-00-931-3307 MPN 12C1428-9Actuat Clutch Plate
- 1680-00-949-0050 MPN 12F1171-3Canopy Curtain Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-546-3806 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C305-6-14 | Lockheed Martin Corporation |