NSN 5306-01-546-4400
Coaxial Connector
Hexagon extended washer head style, between 0.465 inches and 0.475 inches head height, between 0.297 inches and 0.312 inches width between flats, hole diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number C305-4-10 for national stock number 5306015464400.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-546-4400.
-
MPN or Model
C305-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Head Style
Hexagon extended washer -
Head Height
Between 0.465 inches and 0.475 inches -
Width Between Flats
Between 0.297 inches and 0.312 inches -
Hole Diameter
Between 0.248 inches and 0.249 inches -
Single Shear Strength
15600 pounds per square inch -
Thread Diameter
0.250 inches -
Hole Quantity
1 -
Hole Type
Threaded -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hole Configuration Style
Round -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium or nickel -
Surface Treatment Specification
Mil-c-8837 type ii class 3 or type ii class 2 military standard all treatment responses and ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-016-9342 MPN 540SE505Test Set Cable Assy
- 1680-00-068-1329 MPN 12M5953-7Pressure Pad Guide
- 1560-00-280-6152 MPN 12W6160-29Aircraft Structural Component Bracket
- 1560-00-452-0010 MPN 12H41406-3Brake Spacer Bracket
- 4920-00-794-7601 MPN 12A3411-1Test Adapter Kit
- 4920-00-998-3491 MPN 12A0148-1Aircraft Maintenance Fixture
- 1560-01-041-0454 MPN 16W380-60Leading Upper Wing Seal Assembly
- 1560-01-045-9797 MPN 16K2622-11Jettison Release Lever Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-546-4400 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C305-4-10 | Lockheed Martin Corporation |