NSN 5306-01-547-0269
Coaxial Connector
Between 2.0985 inches and 2.1285 inches fastener length, spline extended washer head style, 0.312 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number ST3M753-5-25 for national stock number 5306015470269.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-547-0269.
-
MPN or Model
ST3M753-5-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.551 inches -
Fastener Length
Between 2.0985 inches and 2.1285 inches -
Head Style
Spline extended washer -
Head Height
0.312 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
0.045 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.3125 inches -
Grip Length
1.5625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-069-6962 MPN 11911-6-14Shoulder Screw
- 5305-01-417-2495 MPN 11825D4-20Close Tolerance Screw
- 5305-01-462-2726 MPN 11827V4-12AClose Tolerance Screw
- 5305-01-478-2830 MPN 11845-V3-4AClose Tolerance Screw
- 5305-01-512-8364 MPN 11825D4-18AClose Tolerance Screw
- 5306-01-206-5459 MPN 458-56168-501Externally Relieved Body Bolt
- 5306-01-331-0479 MPN 11701A05U021Close Tolerance Bolt
- 5306-01-332-3183 MPN 11797A05U032Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-547-0269 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M753-5-25 | Boeing Company, The |
11829-5-25 | Reid Products Inc. |