NSN 5306-01-547-5464
Coaxial Connector
Item has drilled head.
Manufacturer part number NAS6404A4H for national stock number 5306015475464.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-547-5464.
-
MPN or Model
NAS6404A4H
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 0.605 inches and 0.635 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r56400 -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-7414 MPN NAS1063A14-425Terminal Board Marker Strip
- 1560-01-572-8710 MPN L3003943-032Aircraft Access Door
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-660-0086 MPN NAS1063A2-536FTerminal Board Marker Strip
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-008-5846 MPN NAS1632E26Machine Screw
- 5305-00-008-5921 MPN NAS1190C04T6LSocket Head Cap Screw
- 5305-00-052-8874 MPN MS24630-1Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-547-5464 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6404A4H | National Aerospace Standards |