NSN 5306-01-548-2247
Coaxial Connector
Between 0.635 inches and 0.665 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1953C5 for national stock number 5306015482247.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-548-2247.
-
MPN or Model
NAS1953C5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.635 inches and 0.665 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
896 megapascals -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Minimum Yield Strength
586 megapascals -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response and ams5732 assn standard 2nd material response and ams5737 assn standard 3rd material response and ams585 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-972-8484 MPN NAS715-11BElectrical Receptacle Connector
- 5940-01-625-6038 MPN NAS1063F-1-2Terminal Board Marker Strip
- 5305-00-007-0279 MPN NAS1100C06-14PMachine Screw
- 5305-00-007-3027 MPN NAS1102E04-11Machine Screw
- 5305-00-052-6887 MPN MS35198-48Machine Screw
- 5305-00-052-7489 MPN MS24627-13Tapping Screw
- 5305-00-052-9956 MPN MS24619-14Tapping Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-548-2247 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1953C5 | National Aerospace Standards |