NSN 5306-01-548-2249
Coaxial Connector
Between 0.635 inches and 0.665 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1223C5 for national stock number 5306015482249.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-548-2249.
-
MPN or Model
NAS1223C5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.635 inches and 0.665 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.325 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Stainless steel -
Material Specification
Ams5735 assn standard 1st material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-354-9983 MPN NAS1063A3-1004Terminal Board Marker Strip
- 5940-01-393-8969 MPN NAS1063A2-TB107BUTerminal Board Marker Strip
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-1556 MPN NAS1100C02-3PMachine Screw
- 5305-00-007-9896 MPN NAS1102C04-26PMachine Screw
- 5305-00-063-9645 MPN NAS1096-2-14Machine Screw
- 5305-00-082-1656 MPN NAS1081C06A3Setscrew
- 5305-00-175-3061 MPN NAS1101-3-16Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-548-2249 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1223C5 | National Aerospace Standards |
Stock Check
- NE: 1507
- NS: 160