NSN 5306-01-551-0742
Coaxial Connector
Between 1.638 inches and 1.668 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6308-18 for national stock number 5306015510742.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-551-0742.
-
MPN or Model
NAS6308-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 1.638 inches and 1.668 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.5000 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard 1st material response or ams5737 assn standard 2nd material response or ams5853 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas4003 national std/spec single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6308 national std/spec
More from these suppliers
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-066-7324 MPN MS24694C64Machine Screw
- 5305-00-071-1764 MPN MS90725-104Hexagon Head Cap Screw
- 5305-00-143-1985 MPN NAS1625-25Machine Screw
- 5305-00-151-6246 MPN MS16996-31BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-551-0742 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308-18 | National Aerospace Standards |
NAS6308-18 | Gulfstream Aerospace Corporation |
NAS6308-18 | Gulfstream Aerospace Corporation |
NAS6308-18 | National Aerospace Standards |
NAS6308-18 | Gulfstream Aerospace Corporation |
NAS6308-18 | National Aerospace Standards |
NAS6308-18 | Gulfstream Aerospace Corporation |
NAS6308-18 | National Aerospace Standards |
NAS6308-18 | Gulfstream Aerospace Corporation |