NSN 5306-01-551-7226
Coaxial Connector
Between 0.885 inches and 0.915 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1953-9 for national stock number 5306015517226.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-551-7226.
-
MPN or Model
NAS1953-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.885 inches and 0.915 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
End Application
Helicopter, iroquois hh/uh-1 -
Grip Length
Between 0.552 inches and 0.572 inches -
Min. Tensile Strength (psi)
180 pounds per square inch -
Material
Steel
More from these suppliers
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-007-9893 MPN NAS1102C04-13Machine Screw
- 5305-00-106-4044 MPN NAS1100C5-10Machine Screw
- 5305-00-116-1446 MPN MS21262-62Socket Head Cap Screw
- 5305-00-151-0134 MPN NAS208-16Machine Screw
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-551-7226 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1953-9 | National Aerospace Standards |