NSN 5306-01-551-7300
Coaxial Connector
Thread diameter 0.190 thsd jf cmlp 32.
Manufacturer part number NAS1953-10 for national stock number 5306015517300.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-551-7300.
-
MPN or Model
NAS1953-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.963 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
End Application
Helicopter, iroquois hh/uh-1 -
Grip Length
Between 0.615 inches and 0.635 inches -
Min. Tensile Strength (psi)
180 pounds per square inch -
Material
Steel
More from these suppliers
- 5940-00-243-7680 MPN NAS704T3Stud Terminal
- 5305-00-008-5882 MPN NAS1101E04-4PMachine Screw
- 5305-00-060-9253 MPN NAS1123-4HClose Tolerance Screw
- 5305-00-067-9864 MPN MS24667-3Socket Head Cap Screw
- 5305-00-115-9526 MPN NASM90725Hexagon Head Cap Screw
- 5305-00-140-4899 MPN NAS1352-6LE24PSocket Head Cap Screw
- 5305-00-151-9655 MPN NAS1190-5T5LSocket Head Cap Screw
- 5305-00-208-6183 MPN MS24677-98Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-551-7300 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1953-10 | National Aerospace Standards |
Stock Check
- NE: 34
- NS: 1