NSN 5306-01-552-0198
Coaxial Connector
0.650 inches fastener length, dished hexagon head style, 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1953-5 for national stock number 5306015520198.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-0198.
-
MPN or Model
NAS1953-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.650 inches -
Head Style
Dished hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
End Application
Helicoptor, iroquois, hh/uh1 -
Grip Length
0.312 inches -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Steel comp 4140
More from these suppliers
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5940-01-381-7237 MPN NAS1063B141-155Terminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-051-2330 MPN MS51958-99Machine Screw
- 5305-00-054-9251 MPN MS51045-29Setscrew
- 5305-00-057-9598 MPN MS51862-17Tapping Screw
- 5305-00-074-4436 MPN NAS623-5-6Machine Screw
- 5305-00-151-9316 MPN MS21207C6-8Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-0198 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1953-5 | National Aerospace Standards |
Stock Check
- NE: 1