NSN 5306-01-552-3190
Coaxial Connector
Between 3.182 inches and 3.555 inches fastener length, flat chamfer head style, between 0.959 inches and 0.975 inches head diameter, head height: between 0.108 inches and 0.180 inches .
Manufacturer part number TLH210-9-46 for national stock number 5306015523190.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-3190.
-
MPN or Model
TLH210-9-46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.500 inches -
Fastener Length
Between 3.182 inches and 3.555 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.959 inches and 0.975 inches -
Head Height
Between 0.108 inches and 0.180 inches -
Grip Diameter
Between 0.168 inches and 0.180 inches -
Thread Diameter
0.5625 inches -
Grip Length
Between 2.865 inches and 2.875 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper shank, protruding head, shear type oversize -
Material
Steel -
Material Specification
Ams6487 assn standard 1st material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams2416 assn standard 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-115-6033 MPN 51B293-5Close Tolerance Screw
- 5305-01-025-4364 MPN PBF1068-311CMachine Screw
- 5305-01-260-8939 MPN LD111-0029-0614Close Tolerance Screw
- 5305-01-412-5360 MPN LD111-0044-0815Close Tolerance Screw
- 5305-01-465-2399 MPN TX1027D3-5AClose Tolerance Screw
- 5305-01-512-8411 MPN TX1027D3-5AFClose Tolerance Screw
- 5305-01-513-9637 MPN ST3M557-4-5Close Tolerance Screw
- 5305-01-519-8255 MPN BACS12ER3K10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-3190 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH210-9-46 | Sps Technologies, Llc |
TLH210-9-46 | Reid Products Inc. |