NSN 5306-01-552-3647
Coaxial Connector
Between 1.447 inches and 1.472 inches fastener length, flat chamfer head style, 0.613 inches head diameter, head height: 0.081 inches .
Manufacturer part number TLH110-6-18 for national stock number 5306015523647.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-3647.
-
MPN or Model
TLH110-6-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.034 inches and 1.211 inches -
Fastener Length
Between 1.447 inches and 1.472 inches -
Head Style
Flat chamfer -
Head Diameter
0.613 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.2681 inches and 0.2884 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.115 inches and 1.130 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt-taper shank, shear, 100 degree head type, oversize -
Material
Steel -
Material Specification
Ams6487 assn standard 1st material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams6487 assn standard 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-101-8535 MPN HT4024L5-4-1Close Tolerance Screw
- 5305-01-217-4009 MPN PBF1381-2309Close Tolerance Screw
- 5305-01-314-5483 MPN PBF1211-5-12FClose Tolerance Screw
- 5305-01-343-4103 MPN 3M925C3-16AClose Tolerance Screw
- 5305-01-380-7178 MPN PBF1198-6-30Close Tolerance Screw
- 5305-01-627-2855 MPN JSFB34V06-61Machine Screw
- 5305-01-646-1342 MPN JSFB12E06-7Machine Screw
- 5305-01-646-1357 MPN JSFB12V04-11Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-3647 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-6-18 | Sps Technologies, Llc |
TLH110-6-18 | Reid Products Inc. |