NSN 5306-01-552-3648
Coaxial Connector
Between 2.950 inches and 2.975 inches fastener length, between 0.6100 inches and 0.6542 inches grip diameter, 0.500 inches thread diameter, grip length: between 2.365 inches and 2.380 inches .
Manufacturer part number TLH110-8-38 for national stock number 5306015523648.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-3648.
-
MPN or Model
TLH110-8-38
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.255 inches and 2.490 inches -
Fastener Length
Between 2.950 inches and 2.975 inches -
Grip Diameter
Between 0.6100 inches and 0.6542 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.365 inches and 2.380 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt-taper shank, shear, 100 degree head type, oversize -
Thread Series Designator
Unjf
More from these suppliers
- 5930-01-651-5649 MPN PBF1730-5Proximity Switch
- 5305-00-310-5236 MPN PBF1069-210CSocket Head Cap Screw
- 5305-00-505-3007 MPN LS15264V06-7Machine Screw
- 5305-01-054-6236 MPN PBF1198-6-19Close Tolerance Screw
- 5305-01-054-6289 MPN PBF1165-5-9Close Tolerance Screw
- 5305-01-055-3750 MPN NAS1101-06-22Machine Screw
- 5305-01-231-2211 MPN BACB30NN4K19Close Tolerance Screw
- 5305-01-236-1679 MPN LD111-0044-0414Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-3648 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-8-38 | Sps Technologies, Llc |
TLH110-8-38 | Reid Products Inc. |