NSN 5306-01-552-3649
Coaxial Connector
Between 3.075 inches and 3.100 inches fastener length, between 0.6074 inches and 0.6542 inches grip diameter, 0.500 inches thread diameter, grip length: between 2.490 inches and 2.505 inches .
Manufacturer part number TLH110-8-40 for national stock number 5306015523649.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-3649.
-
MPN or Model
TLH110-8-40
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.380 inches and 2.615 inches -
Fastener Length
Between 3.075 inches and 3.100 inches -
Grip Diameter
Between 0.6074 inches and 0.6542 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.490 inches and 2.505 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt-taper shank, shear, 100 degree head type, oversize -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-525-5016 MPN NAS5312E3-6JSix Lobe Recess Scr
- 5305-00-038-1918 MPN 51B221-28Close Tolerance Screw
- 5305-00-456-2431 MPN PBF1068-622CMachine Screw
- 5305-01-054-2536 MPN BACB30LK3-11Close Tolerance Screw
- 5305-01-130-3258 MPN PBF1580-3-12Machine Screw
- 5305-01-175-2773 MPN 9965M82P02Machine Screw
- 5305-01-349-0815 MPN PBF1475-5-13Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-3649 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLH110-8-40 | Sps Technologies, Llc |
TLH110-8-40 | Reid Products Inc. |