NSN 5306-01-552-4331
Coaxial Connector
Between 2.371 inches and 2.396 inches fastener length, flat chamfer head style, 1.018 inches head diameter, head height: 0.140 inches .
Manufacturer part number TL110-9-32 for national stock number 5306015524331.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4331.
-
MPN or Model
TL110-9-32
-
Thread Length
Between 1.850 inches and 2.145 inches -
Fastener Length
Between 2.371 inches and 2.396 inches -
Head Style
Flat chamfer -
Head Diameter
1.018 inches -
Head Height
0.140 inches -
Grip Diameter
Between 0.3306 inches and 0.3690 inches -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.990 inches and 2.145 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt-taper, shank, shear, 100 degree head type, oversize
More from these suppliers
- 5305-00-372-9982 MPN HT4024L3-11Close Tolerance Screw
- 5305-00-574-0225 MPN PBF1355-3-4Machine Screw
- 5305-01-020-9617 MPN HT4025L3-11Close Tolerance Screw
- 5305-01-263-6159 MPN PBF1166B3-4Close Tolerance Screw
- 5305-01-351-0805 MPN PBF1419-3-15Close Tolerance Screw
- 5305-01-351-6938 MPN PBF1417-4-12Close Tolerance Screw
- 5305-01-357-6326 MPN LE111-0033-0003Machine Screw
- 5305-01-584-7580 MPN 120-225-3T16Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4331 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TL110-9-32 | Sps Technologies, Llc |
TL110-9-32 | Reid Products Inc. |