NSN 5306-01-552-4337
Coaxial Connector
Between 1.447 inches and 1.472 inches fastener length, flat chamfer head style, 0.630 inches head diameter, head height: 0.070 inches .
Manufacturer part number TLV110-6-18 for national stock number 5306015524337.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4337.
-
MPN or Model
TLV110-6-18
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Length
Between 1.045 inches and 1.200 inches -
Fastener Length
Between 1.447 inches and 1.472 inches -
Head Style
Flat chamfer -
Head Diameter
0.630 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.2681 inches and 0.2884 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.115 inches and 1.130 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response
More from these suppliers
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-191-2469 MPN PBF1202-6-20Close Tolerance Screw
- 5305-01-191-3131 MPN PBF1356V08-1Close Tolerance Screw
- 5305-01-234-2565 MPN LD111-0044-2416Close Tolerance Screw
- 5305-01-260-8938 MPN LD111-0044-0612Close Tolerance Screw
- 5305-01-392-2599 MPN PBF1570-4-12LClose Tolerance Screw
- 5305-01-417-4028 MPN PBF1381-0317Close Tolerance Screw
- 5305-01-512-8414 MPN TX1027D3-7AFClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4337 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLV110-6-18 | Sps Technologies, Llc |
TLV110-6-18 | Reid Products Inc. |