NSN 5306-01-552-4339
Coaxial Connector
Between 1.072 inches and 1.097 inches fastener length, flat chamfer head style, 0.630 inches head diameter, head height: 0.070 inches .
Manufacturer part number TLV110-6-12 for national stock number 5306015524339.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4339.
-
MPN or Model
TLV110-6-12
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Length
Between 0.670 inches and 0.825 inches -
Fastener Length
Between 1.072 inches and 1.097 inches -
Head Style
Flat chamfer -
Head Diameter
0.630 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.2759 inches and 0.2884 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.740 inches and 0.755 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response
More from these suppliers
- 5305-00-725-5917 MPN PBF1068-522CMachine Screw
- 5305-00-807-0389 MPN NAS1102-08-5Machine Screw
- 5305-00-963-6087 MPN 51B154-3Machine Screw
- 5305-01-021-3737 MPN NAS1101E04-13Machine Screw
- 5305-01-197-3271 MPN PBF1355V3-5DMachine Screw
- 5305-01-263-6160 MPN PBF1166B3-5Close Tolerance Screw
- 5305-01-338-9346 MPN BACB30NN4K12Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4339 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLV110-6-12 | Sps Technologies, Llc |
TLV110-6-12 | Reid Products Inc. |