NSN 5306-01-552-4340
Coaxial Connector
Between 0.947 inches and 0.972 inches fastener length, flat chamfer head style, 0.630 inches head diameter, head height: 0.070 inches .
Manufacturer part number TLV110-6-10 for national stock number 5306015524340.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4340.
-
MPN or Model
TLV110-6-10
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Length
Between 0.545 inches and 0.700 inches -
Fastener Length
Between 0.947 inches and 0.972 inches -
Head Style
Flat chamfer -
Head Diameter
0.630 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.2655 inches and 0.2754 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.615 inches and 0.630 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response
More from these suppliers
- 5305-00-057-1725 MPN NAS1101-08-5Machine Screw
- 5305-00-501-9798 MPN NAS1101E04-3Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-144-0437 MPN NAS1101-02-8Machine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5306-00-019-9428 MPN BACB30LM10DU44Close Tolerance Bolt
- 5306-00-402-8862 MPN MS21250-06074Shear Bolt
- 5306-00-727-0720 MPN MS21250-12052Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4340 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLV110-6-10 | Sps Technologies, Llc |
TLV110-6-10 | Reid Products Inc. |