NSN 5306-01-552-4341
Coaxial Connector
Between 1.447 inches and 1.472 inches fastener length, flat chamfer head style, 0.522 inches head diameter, head height: 0.070 inches .
Manufacturer part number TLV110-5-18 for national stock number 5306015524341.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-552-4341.
-
MPN or Model
TLV110-5-18
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Length
Between 1.045 inches and 1.200 inches -
Fastener Length
Between 1.447 inches and 1.472 inches -
Head Style
Flat chamfer -
Head Diameter
0.522 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.2681 inches and 0.2884 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.115 inches and 1.230 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard 1st material response
More from these suppliers
- 5305-01-101-0707 MPN 965813-160CMachine Screw
- 5305-01-261-1901 MPN 51B335-9XClose Tolerance Screw
- 5305-01-357-6326 MPN LE111-0033-0003Machine Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-451-8894 MPN LD111-0045-2412Close Tolerance Screw
- 5306-00-802-0883 MPN 51B464-3A3Machine Bolt
- 5306-01-054-3407 MPN PBF7521-4-8Shear Bolt
- 5306-01-287-2909 MPN PBF1253-9-22Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-552-4341 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TLV110-5-18 | Sps Technologies, Llc |
TLV110-5-18 | Reid Products Inc. |